Suspension Ford F250/F350 Super Duty 4" Front 4" Rear 4WD
centered around two Pro-Ride coil springs. The box kit includes two
new radius arm drop brackets to put the stock radius arm back at
factory angle which will maintain your stock driving
characteristics. The kit also comes with a new steering stabilizer,
anti-sway bar drop brackets, a dropped pitman arm for steering
angle correction, a track bar relocation bracket to properly center
your axle and bump stop extension. The rear is lifted via a 4"
These trucks were manufactured with and without top mounted
overload springs on the rear leaf springs. A top mounted overload
is an extra leaf separate from the pack that set above the main
leaf. You will need to identify which you have before
The kit comes with a single steering stabilizer in the kit, but you
can upgrade to a dual system in the customize your kit
If your vehicle is equipped with a carrier bearing, you will need
to order 123402 in the options section.
Removal of factory block required.
Front exhaust modification may be required to clear the front
driveshaft on gas models.
Install Time: 8 hours
Max Tire Size: 35 x 12.50
Wheel Backspacing: 4"
Application:2008-2010 Ford F250 Super Duty 4WD
2008-2010 Ford F350 Super Duty 4WD Diesel
Installation Instructions - PDF Download
is currently empty