BDS
Suspension Ford F250/F350 Super Duty 4" Front 4" Rear Suspension
System 4WD 2008-2010
Why a 4-link
system? It's simple, with 10" of wheel travel there is less than 1
degree of caster change (front axle rotation), this means control
in the steering wheel over rough terrain. The stability in the
steering wheel is noticable even under normal driving conditions.
In addition to 4 beefy control arms, this kit comes with new 4-link
frame mounting brackets. These aren't a drop down bracket, they
actually replace the stock mounting system. -Don't worry, no
welding required. The kit also comes with a new steering
stabilizer, anti-sway bar drop brackets, a dropped pitman arm for
steering angle correction, a track bar relocation bracket to
properly center your axle and bump stop extension. The rear is
lifted via new Glide-Ride leaf springs.
Note:
Removal of the factory block is required
The kit comes with a single steering stabilizer in the kit, but you
can upgrade to a dual system in the customize your kit
section
If your vehicle is equipped with a carrier bearing, you will need
to order 123402 in the options section
Estimated
Install Time: 8 hours
Max Tire Size: 35 x 12.50
Wheel Backspacing: 4"
Vehicle
Application:
2008-2010 Ford F250 Super Duty 4WD
Diesel
2008-2010 Ford F350 Super Duty 4WD Diesel
Installation Instructions - PDF Download
