Fat Bob's Garage - 1997 / Toyota / 4 Runner / All Products

Toyota 4Runner 0-2" Rear Bilstein 5100 Series Shocks (Pair) 96-02

Sat, 16 Feb 2019 12:25:00 GMT

Toyota 4Runner 0-2" Rear Bilstein 5100 Series Shocks (Pair) 96-02
Buy Now: $252.00

Toyota 4Runner 0-2" Rear Bilstein 5100 Series Shocks (Pair) 96-02

Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV's. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

SET OF TWO SHOCKS.

Vehicle Applications:
1996 - 2002 Toyota 4Runner 4wd 0-2" rear lift

***This product is not discountable***

Visit 4 Runner to see additional products in this category.

Toyota 4Runner 2.5" Poly Spacer Lift Leveling Kit 1996-2019 2wd/4wd

Fri, 1 Feb 2019 14:40:00 GMT

Toyota 4Runner 2.5" Poly Spacer Lift Leveling Kit 1996-2019 2wd/4wd
Buy Now: $59.95

Toyota 4Runner 2.5" Poly Spacer Lift Leveling Kit 1996-2019 2wd/4wd

These polyurethane spacers are an economical way to lift the front of your truck and increase clearance an average of 2.5”. The 4WD Differential Drop is recommended for 4x4 models. The differential drop helps prevent excess CV joint and axle wear on lifted 4WD trucks.

Vehicle Application:
1996-2019 Toyota 4Runner 2WD/4WD* (Will NOT fit XREAS Suspension.)

Kit Includes:

Four (4) poly spacers, 6 bolts, nuts, washers, and installation instructions.

Installation Instructions PDF Download

Visit 4 Runner to see additional products in this category.

Toyota 6x5.5 1.5" Wheel Spacer 12mm Studs 1960-2000

Tue, 21 Oct 2014 11:31:00 GMT

Toyota 6x5.5 1.5" Wheel Spacer 12mm Studs 1960-2000
Buy Now: $112.99

Toyota 6x5.5 1.5" Wheel Spacer 12mm Studs 1960-2000

G2 offers the most complete line of off-road wheel spacers and adapters for your vehicle, specifically designed to widen your vehicles track width to allow for wider wheels/tires and to increase off-road stability.

Features:

pair of C6 on 5.5 Bolt Pattern
1.50 inch Thick
Toyota 12mm studs
Black Anodized Finish

Includes:

Pre-Installed Wheel Studs
Lug Nuts
Thread Locker Compound

Vehicle Application:
1995-2000 Toyota Tacoma
1976-1995 Toyota Pickup
1993-1999 Toyota 4Runner
1984-1995 Toyota 4Runner
1960-1984 Toyota FJ40

Visit 4 Runner to see additional products in this category.

Toyota 6x5.5 1.25" Wheel Spacer 1996-Present

Tue, 21 Oct 2014 11:11:00 GMT

Toyota 6x5.5 1.25" Wheel Spacer 1996-Present
Buy Now: $112.99

Toyota 6x5.5 1.25" Wheel Spacer 1996-Present

G2 offers the most complete line of off-road wheel spacers and adapters for your vehicle, specifically designed to widen your vehicles track width to allow for wider wheels/tires and to increase off-road stability. Each kit comes complete with a pair of CNC Machined T-6061 aluminum spacers that are anodized for corrosion resistance. Each kit comes complete with pre-installed wheel studs, lug nuts, thread locker compound, and detailed instructions.

Wheel spacer kit. 1.25" thick; 6x5.5" bolt patterns

Vehicle Application:
2001+ Toyota Tacoma 4WD and Pre-Runner
2000-2006 Toyota Tundra
1996+ Toyota 4 Runner
2007+ Toyota FJ Cruiser

Visit 4 Runner to see additional products in this category.

Toyota 4Runner 3" Suspension Lift Kit 4WD 1996-2002

Tue, 7 Jan 2014 13:28:00 GMT

Toyota 4Runner 3" Suspension Lift Kit 4WD 1996-2002
Buy Now: $339.95

Toyota 4Runner 3" Suspension Lift Kit 4WD 1996-2002

Take your Toyota 4-Runner to new heights with Rough Country's New 3-inch N2.0 Suspension Lift for '96-'04 models. With enough ride height to clear up to 33 x 11.50 tires, you'll get more off-road articulation and a much meaner-looking stance at an incredible value.

Gain balanced handling both on and off-road with a shock like no other: The N2.0 Shock Absorber is designed specifically for the weight and ride height of your Toyota 4-Runner, giving you custom-tuned performance perfect for any driving situation.

Features

Easy bolt on installation
Increased ground clearance
Maintains factory ride quality
Levels the front with the rear of the vehicle
No strut disassembly or strut compressor required for installation
Strut extensions do not preload your coil spring
Rear shocks manufactured with recoil cut-off construction
Includes application valved N2.0 series shock absorbers which offer the best in balanced performance for on and off-road use

Kit Contains:
Front: Strut extensions, hardware
Rear: Lifted coil springs
Shocks: 2 Rear Premium N2.0 series

Vehicle Application:
1996-2002 Toyota 4Runner

***This product is not discountable***

Installation Instructions - PDF Download

Visit 4 Runner to see additional products in this category.

Toyota 4-Runner Light Racing Adjustable Upper Control Arms 1996-2002

Wed, 7 Nov 2012 12:32:00 GMT

Toyota 4-Runner Light Racing Adjustable Upper Control Arms 1996-2002
Buy Now: $899.96

Light Racing Adjustable Upper Control Arms Toyota 4-Runner 1996-2002

Many Toyota trucks and SUVs run out of factory adjustment when you install lift kits. With our patented design this upper control arm provides an additional +/- 2 degrees of camber and 0 degree to +4 degree of caster change. Built with an OE style ball joint and new SpecRide(tm) bushings, this arm is designed to correct alignment angles while maintaining factory ride quality. The hybrid tubular and forged steel design is tough enough to race - on or off-road. These remove and replace arms are available in pairs for lifted and off-road applications.

These arms feature our NEW SpecRide(tm) Bushings
SpecRide(tm) Proprietary Bushings Feature:
* Free moving pivot sleeve which eliminates failures caused by high travel suspensions
* Noise and vibration control
* Ozone, oil and alkaline resistant material

Adjustment range: Camber +/- 2.00 degree
Caster 0.0 degree to +4.00 degree
Installation time: .8 hr/side

***This product is not discountable***

Installation Instructions - PDF Download

Visit 4 Runner to see additional products in this category.

Toyota 4Runner 2.5" Rear Heavy Load Coil Spring Lift 1996-2002

Fri, 4 Jun 2010 22:22:00 GMT

Toyota 4Runner 2.5" Rear Heavy Load Coil Spring Lift 1996-2002
Buy Now: $214.00

ARB Toyota 4Runner 2.5" Rear Coil Spring Lift 1996-2002

New high strength spring steel grade is designed to withstand higher operating stresses with superior resistance to sag and improved toughness and corrosion fatigue properities. Designes used to obtain optimum ride comfort and load carrying capabilities.

Kit Contains 2 Rear lift OME Coil Springs, Heavy load.

Vehicle Application:
1996-2002 Toyota 4Runner

***This product is not discountable***

Visit 4 Runner to see additional products in this category.

Toyota 4Runner 3" Front Steel Leveling Lift Kit 1996-2002

Mon, 8 Jun 2009 13:59:00 GMT

Toyota 4Runner 3" Front Steel Leveling Lift Kit 1996-2002
Buy Now: $119.95

Toyota 4Runner 3" Leveling Kit 1996-2002

1/4" HOT P.O. STEEL PLATE is precision CNC cut.
HEAVY WALL D.O.M. PIPE for a superior load bearing member to ensure maximum stability.
GRADE 8 BOLTS, where others use only grade 5.
ROBOTIC PULSED WELDING produces an aerospace grade weld that is of a much higher quality than the short arc weld found on similar products.
POWDER COATING that has been specially formulated for this product application. Paint just won't cut it!
OEM FLAGE LOCK NUTS are included with every kit to ensure a proper torque spec. can be met on install.
ILLUSTRATED INSTRUCTIONS are included with every kit to help with a quick and easy install.
This kit will retain factory ride quality. Stock shocks can be used. No additional modification to the truck is necessary.
LIFETIME WARRANTY.
NO Spring Compressor Required.
Easily bolts onto stock strut mounts.
A floor jack, two jack stands, and normal shop tools are all you need for installation.
Installs in 30 - 90 minutes!

Vehicle Application:
1996-2002 Toyota 4Runner

Installation Instructions - PDF Download

Visit 4 Runner to see additional products in this category.

Toyota 4Runner 2.5" Front Steel Leveling Lift Kit 1996-2002

Mon, 8 Jun 2009 13:53:00 GMT

Toyota 4Runner 2.5" Front Steel Leveling Lift Kit 1996-2002
Buy Now: $119.95

Toyota 4Runner 2.5" Leveling Kit 1996-2002

1/4" HOT P.O. STEEL PLATE is precision CNC cut.
HEAVY WALL D.O.M. PIPE for a superior load bearing member to ensure maximum stability.
GRADE 8 BOLTS, where others use only grade 5.
ROBOTIC PULSED WELDING produces an aerospace grade weld that is of a much higher quality than the short arc weld found on similar products.
POWDER COATING that has been specially formulated for this product application. Paint just won't cut it!
OEM FLAGE LOCK NUTS are included with every kit to ensure a proper torque spec. can be met on install.
ILLUSTRATED INSTRUCTIONS are included with every kit to help with a quick and easy install.
This kit will retain factory ride quality. Stock shocks can be used. No additional modification to the truck is necessary.
LIFETIME WARRANTY.
NO Spring Compressor Required.
Easily bolts onto stock strut mounts.
A floor jack, two jack stands, and normal shop tools are all you need for installation.
Installs in 30 - 90 minutes!

Vehicle Application:
1996-2002 Toyota 4Runner

Installation Instructions - PDF Download

Visit 4 Runner to see additional products in this category.

Toyota 4Runner 2" Lift Kit 1996-2002

Mon, 8 Jun 2009 13:47:00 GMT

Toyota 4Runner 2" Lift Kit 1996-2002
Buy Now: $269.47

Toyota 4Runner 2" Lift Kit 1996-2002

1/4" HOT P.O. STEEL PLATE is precision CNC cut.
HEAVY WALL D.O.M. PIPE for a superior load bearing member to ensure maximum stability.
GRADE 8 BOLTS, where others use only grade 5.
ROBOTIC PULSED WELDING produces an aerospace grade weld that is of a much higher quality than the short arc weld found on similar products.
POWDER COATING that has been specially formulated for this product application. Paint just won't cut it!
OEM FLAGE LOCK NUTS are included with every kit to ensure a proper torque spec. can be met on install.
ILLUSTRATED INSTRUCTIONS are included with every kit to help with a quick and easy install.
This kit will retain factory ride quality. Stock shocks can be used. No additional modification to the truck is necessary.
LIFETIME WARRANTY.
NO Spring Compressor Required.
Easily bolts onto stock strut mounts.
A floor jack, two jack stands, and normal shop tools are all you need for installation.
Installs in 30 - 90 minutes!

Vehicle Application:
1996-2002 Toyota 4Runner

Installation Instructions - PDF Download

Visit 4 Runner to see additional products in this category.