Fat Bob's Garage - 1987 / Jeep / Cherokee / All Products

1.5" Rear Lift Blocks (Pair)

Fri, 25 Jun 2021 16:35:34 GMT

1.5" Rear Lift Blocks (Pair)
Buy Now: $29.99

1.5" Rear Blocks (Pair)

Made of fiberglass reinforced nylon for superior strength and durability.
Single 9/16-inch pin blocks.
2.5-inches wide
Sold as a pair

Installation Instructions - PDF Download

Visit Cherokee to see additional products in this category.

Rough Country Jeep HD Steering Upgrade Kit TJ, XJ, MJ, ZJ

Tue, 31 Mar 2020 09:58:46 GMT

Rough Country Jeep HD Steering Upgrade Kit TJ, XJ, MJ, ZJ
Buy Now: $349.95

Rough Country Jeep HD Steering Upgrade Kit TJ, XJ, MJ, ZJ

Benefits:

Replaces weak factory tie-rod and drag link
Holds up better against off-road obstacles
Durable 1.5-inch DOM tubing
Engineered with wrench flats for ease of install and adjustability
Rotational non-articulating joints to prevent bump steer & provide a tighter steering feel

Brand: Rough Country

Vehicle Fitment:
1984 - 2001 Jeep Cherokee XJ
1986 - 1993 Jeep Comanche MJ
1993 - 1998 Jeep Grand Cherokee ZJ
1997 - 2006 Jeep Wrangler TJ

Kit Contents:

HD tie rod, tie rod ends, HD drag link

Notes:

ONLY works with 4-inches of lift or more
Requires 7 Degree Ball Joint Reamer
Will not work with factory wheels
ONLY works with Rough Country Steering Stabilizers

Visit Cherokee to see additional products in this category.

Jeep Wrangler TJ/YJ Cherokee XJ Stainless Steel Front & Rear Brake Lines 1984-2006

Mon, 2 Dec 2019 08:31:35 GMT

Jeep Wrangler TJ/YJ Cherokee XJ Stainless Steel Front & Rear Brake Lines 1984-2006
Buy Now: $89.95

Jeep Wrangler TJ/YJ Cherokee XJ Stainless Steel Front & Rear Brake Lines 1984-2006

Kit Contains:
(2) Front stainless steel braided brake lines, (1) rear stainless steel brake line, hardware

These stainless steel brake lines are a Teflon tube wrapped in Kevlar for strength, then a protective coating, and then the stainless steel. Pressure tested to 4000 psi, and are DOT approved.

Estimated Install Time: 3-4 hours

Vehicle Application:
1987-1995 Jeep Wrangler YJ
1997-2006 Jeep Wrangler TJ
1984-2001 Jeep Cherokee XJ

Note:
ONLY fits models with 4-6in of suspension lift

***This product is not discountable***

Visit Cherokee to see additional products in this category.

Jeep Cherokee XJ Rear Bar Pin Flag Nut Kit 1984-2001

Thu, 9 Aug 2018 09:53:00 GMT

Jeep Cherokee XJ Rear Bar Pin Flag Nut Kit 1984-2001
Buy Now: $34.99

Jeep Cherokee XJ Rear Bar Pin Flag Nut Kit 1984-2001

Though production ceased nearly 20 years ago, the Jeep XJ remains one of the most popular 4x4 SUV's in the off-road market, but despite its classic design and fan-favorite status, there's still room for improvement.

The XJ's rear upper shock mount bolts are notorious for breaking off due to the bar pin system and age of the vehicle. When this bolt breaks, there is no way to secure a shock or bar pin eliminator. This can cause a lot of frustration, especially if you're installing a lift kit and encounter this problem near the end of the install.

Rough Country's XJ Rear Bar Pin Flag Nut eliminates this problem, offering a much easier system for replacing the broken bolt and lining everything up correctly. To install, simply knock out the factory nuts welded in the unibody, slide Rough Country's Bar Pin Flag Nut into the unibody hole, and use the flag nut handle to easily line up your new mounting point within the unibody recess. This innovative design saves hours of undue stress and makes it much easier to mount a shock or bar pin eliminator. Plus, if you manage to break a bolt on Rough Country's XJ Bar Pin Flag Nut kit, it is much easier to replace. Ships with new hardware and instructions.

Vehicle Application:

1984 - 2001 Jeep Cherokee XJ 2wd/4wd

***This product is not discountable***

Visit Cherokee to see additional products in this category.

Jeep Cherokee Front Forged Adjustable Track Bar 0-3.5" 4WD 1984-2001

Thu, 26 Jan 2017 12:04:00 GMT

Jeep Cherokee Front Forged Adjustable Track Bar 0-3.5" 4WD 1984-2001
Buy Now: $169.95

Jeep Cherokee Front Forged Adjustable Track Bar 0-3.5" 4WD 1984-2001

This track bar is almost twice the weight of your factory track bar offering ultimate support. Made of forged steel with rubber Clevite bushings.

Features:

Easy bolt on installation.

Massive 1.25" outside diameter.

Made of forged solid steel for unsurpassed strength and durability.

Nearly double the weight of the factory track bar.

Includes Clevite brand OEM style rubber bushings.

Fully adjustable while mounted on the Jeep for a proper fit.

Perfectly centers your Jeeps front axle.

Notes:

ONLY fits models with 0-3.5" suspension lift kits.

Estimated Install Time: 1-2 hours

Kit Includes: Front adjustable track bar, track bar bracket, hardware

Vehicle Application:

1984-2001 Jeep Cherokee XJ 4WD

Installation Instructions - PDF Download

***This product is not discountable***

Visit Cherokee to see additional products in this category.

2" Rear Lift Blocks

Tue, 18 Oct 2016 16:28:00 GMT

2" Rear Lift Blocks
Buy Now: $39.95

2" Rear Blocks 1984-2001

Durable nylon composite blocks are stronger and offer a longer lifespan than cast blocks.
Tapered to reduce drive shaft angle.
Single 9/16-inch pin blocks.
2.5-inches wide
Sold as a pair

Installation Instructions - PDF Download

Visit Cherokee to see additional products in this category.

Jeep TJ XJ ZJ BDS FOX 2.0 Dual Steering Stabilizer Kit 1984-2006

Tue, 6 Oct 2015 11:51:00 GMT

Jeep TJ XJ ZJ BDS FOX 2.0 Dual Steering Stabilizer Kit 1984-2006
Buy Now: $525.65

Jeep TJ XJ ZJ BDS FOX 2.0 Dual Steering Stabilizer Kit 1984-2006

Benefits:

Includes Fox 2.0 Performance stabilizercylinders.
Improves drivability by reducing front end shimmy caused byoversized tires.
Brackets built from ultra strong 3/8" steel.
Durable textured black powdercoated finish w/ riveted stainless steel center BDS badging.
Fox 2.0 cylinders are cold forged 6061 T6 aluminum to resistcorrosion.
This high performance setup gives a great finished look to yourlifted Jeep.

Brand: BDS Suspension / FOX

Vehicle Application:

1997 - 2006 Jeep Wrangler TJ

1984 - 2001 Jeep Cherokee XJ

1993 - 1998 Jeep Grand Cherokee ZJ

Kit Contents:

(2) Fox 2.0 Series stabilizer cylinders, brackets &hardware.

Notes:

ONLY fits models with at least 2" of suspension liftinstalled.

Visit Cherokee to see additional products in this category.

Jeep Cherokee/Grand Cherokee/Wrangler Generation II Front Upper Adjustable Control Arms 1984-2006

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Cherokee/Grand Cherokee/Wrangler Generation II Front Upper Adjustable Control Arms 1984-2006
Buy Now: $276.05

Jeep Cherokee/Grand Cherokee/Wrangler Generation II Front Upper Adjustable Control Arms 1984-2006

Control arms come fully assembled and are sold in pairs. Control arms come with installed new rubber bushings.

Features:

Forged flex end that features 3-1/4" long by 1" male threads for maximum adjustability and strength without sacrifcing thread engagement.
Many competitors use smaller thread sizes.
15 degree of twist allowed to increase droop and compression without transferring torational load to your control arm mounts.
Center steel ball is controlled by tough urethane races to absorb shock and vibration while increasing offroad performance.
U-bracket mount at the axle maintains use of factory rubber bushing.

Vehicle Application:

1984-2001 Jeep Cherokee Front Upper

1999-2004 Jeep Grand Cherokee Front Upper

1993-1998 Jeep Grand Cherokee Front Upper

1997-2006 Jeep Wrangler Front Upper

Installation Instructions - PDF Download

Visit Cherokee to see additional products in this category.

Jeep Cherokee/Grand Cherokee/Wrangler Generation II Front Upper Fixed Control Arms 1984-2006

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Cherokee/Grand Cherokee/Wrangler Generation II Front Upper Fixed Control Arms 1984-2006
Buy Now: $164.95

Jeep Cherokee/Grand Cherokee/Wrangler Generation II Front Upper Fixed Control Arms 1984-2006

Control arms come fully assembled and are sold in pairs. Control arms come with installed new poly bushings.

Features:

Forged flex end that features 3-1/4" long by 1" male threads for maximum adjustability and strength without sacrifcing thread engagement.
15 degree of twist allowed to increase droop and compression without transferring torational load to your control arm mounts.
Center steel ball is controlled by tough urethane races to absorb shock and vibration while increasing offroad performance.
U-bracket mount at the axle maintains use of factory rubber bushing.

Vehicle Application:

1984-2001 Jeep Cherokee Front Upper

1993-1998 Jeep Grand Cherokee Front Upper

1997-2006 Jeep Wrangler Front Upper

Installation Instructions - PDF Download

Visit Cherokee to see additional products in this category.

Jeep Cherokee/Grand Cherokee/Wrangler Lower Control Arm Bushing Kit 1984-2016

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Cherokee/Grand Cherokee/Wrangler Lower Control Arm Bushing Kit 1984-2016
Buy Now: $47.25

Jeep Cherokee/Grand Cherokee/Wrangler Lower Control Arm Bushing Kit 1984-2016

Designed and produced by BDS as a part of an engineered suspension system. Internally and externally fluted bushings for improved lubrication flow. Designed to handle some serious abuse.

Notes:

1st generation arms use 1 1/2" OD bushings, 2nd generation arms use 1 7/8" OD bushings.

Vehicle Application:

1984-2001 Jeep Cherokee

1993-1998 Jeep Grand Cherokee

2007-2016 Jeep Wrangler

1997-2006 Jeep Wrangler

Visit Cherokee to see additional products in this category.