Dodge 2500/3500 6" Front 4" Rear Long Arm Suspension Lift Kit 2003-2007

BDS Dodge 2500/3500 6" Front 4" Rear Long Arm Suspension Lift Kit 2003-2007

This 6" long arm lift kit comes with 6" Pro Ride Coil Springs and features solid upper long arms and tubular lower long control arms.  The long control arm reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road.  This 4 link long arm system retains the factory triangulation of the arms which adds to the stability of the suspension system.  A dropped forged pitman arm is included to maintain the factory steering angles.  A track bar relocation bracket is included to properly center the axle under the vehicle.  Extended bump stops and sway bar links are included to maintain the OE characteristics.  All four control arms are greasable for long term performance.  The extended length lower control arms reduce caster change through wheel travel. 

The rear of the Dodge is lifted via 4" block kit.

Notes:
The rear u-bolts will not fit dually applications.
These vehicle were manufactured with two different diameter rear axles.  You will need to measure the diameter of your rear axle before ordering. 
Although unusual, if driveline vibration occurs, order the transfer case drop kit.  The transfer case drop kit only works with automatic transmissions.
Some 4" rear axles with the dual overload option will require 4 u-bolts 4068.
Depending on the factory transmission mount, some 6" kits may require the transfer case indexing kit if a front driveline vibration persists.
**Long bed trucks require carrier bearing drop part #122501.  See below**

Estimated Install Time: 6-8 hours
Tire & Wheel Combinations: 36" x 12.50" x/17 x 9 and 5" backspacing.

Vehicle Application:
2003-2007 Dodge 2500 4WD Diesel
2003-2007 Dodge 3500 4WD Diesel

Installation Instructions - PDF Download