Dodge Ram 2500/3500 8" Suspension Lift Kit 4WD Diesel 2003-2007
This lift uses a 1/4" steel control arm relocation bracket to relocate the stock upper and lower arms to relieve angles and properly position the front axle. The relocation brackets mount to the stock locations and require minor drilling for extra support. Stock alignment adjustability and control arm angles are maintained. Kit also includes full length coil springs, dropped pitman arm, track bar relocation, sway bar relocation, bump stops, rear block, u-bolts and hardware.
Features:
- Unique upper and lower control arm relocation bracket design.
- Heavy 1/4" steel construction.
- No cutting of the frame required.
- High performance at a low price.
Notes:
2-piece rear driveshaft requires carrier bearing drop kit D5505.
Will NOT fit dually applications.
Rear axle diameter will be 3.5" or 4", measure before ordering.
Minor trimming may be required with some tire/wheel combinations.
A front bumper spacer kit (D5801) is available to gain clearance if necessary.
Depending on the factory transmission mount, in rare cases some 8" kits may not require the transfer case indexing kit. See installation instructions for details.
Designed for diesel models ONLY.
Tire/Wheel Combination:
38 x 13.50 on 17 x 9 with 4.5-5" backspacing
Estimated Install Time: 6-8 hours
Vehicle Application:
2003-2007 Dodge Ram 2500 4WD Diesel
2003-2007 Dodge Ram 3500 4WD Diesel