Fat Bob's Garage - 1977 / Jeep / CJ7 / Drive Train & Differential / All Products

Jeep Front Axle Shaft Left Side 4WD 1967-1986

Thu, 29 Oct 2015 09:25:00 GMT

Jeep Front Axle Shaft Left Side 4WD 1967-1986
Buy Now: $239.39

Jeep Front Axle Shaft Left Side 4WD 1967-1986

High tensile strength 4340 Chromoly is heat-treated, tempered and induction hardened to produce these heavy-duty axles that are up to 40% stronger than stock 1040 axles. Each axle shaft is backed by Alloy USA®’s exclusive ten-year warranty! Our front axle shaft kits include everything you need to complete the job: both passenger and drive side inner and outer axle shafts, seals, U-joints and clips.

***This product is not discountable***

Visit Drive Train & Differential to see additional products in this category.

Breather Front Axle

Thu, 3 Mar 2011 15:47:00 GMT

Breather Front Axle
Buy Now: $9.99

Breather Front Axle Vehicle Application: 1972-1986 Jeep CJ Front Dana 30

***This product is not discountable***

Visit Drive Train & Differential to see additional products in this category.

Jeep CJ7 Rear Axle Shaft, Right 1976-1979

Thu, 3 Mar 2011 15:42:00 GMT

Jeep CJ7 Rear Axle Shaft, Right 1976-1979
Buy Now: $239.39

Alloy USA - Axle Shaft Rear, AMC 20, 1-Piece OE Style RH, Quadratrac

4140 Chromoly Performance Shafts;35 percent stronger than OE;10 year Limited warranty ;AMC 20;Right Hand, 1 piece Conversion, Quadratrac

Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA™ performance shaft.

Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 25-35% stronger.

We use the latest cold spline rolling technology to produce splines that are stronger than traditional cut splines. No cuts means no edges which create stress points and can lead to fracturing.

Axle shafts sold individually. Wheel bearings, seals and wheel studs available separately.

Each shaft is backed by our exclusive 10-year Limited warranty.

Vehicle Application:

1976-1979 Jeep CJ7

***This product is not discountable***

Visit Drive Train & Differential to see additional products in this category.

Jeep CJ Ring & Pinion Dana 30 Front Standard 4.10 Ratio 1972-1986

Thu, 3 Mar 2011 15:42:00 GMT

Jeep CJ Ring & Pinion Dana 30 Front Standard 4.10 Ratio 1972-1986
Buy Now: $305.89

Alloy USA -- Dana 30 Front Standard 4.10 Ratio

Made from high quality 8620 forgings and Gleason gear cutting technology, these gears are made to last; Industry leading Limited 5 year warranty; Dana 30 Front Standard; Ratio is 4.10

These affordable high strength gear sets come in all the popular ratios to satisfy everyone’s gearing needs. Oversized tires require higher ring & pinion ratios to restore performance.

Made from high quality 8620 forgings and Gleason gear cutting technology, these gears are made to last. Complete installation kits are available separately to complete the job.

Exclusive 5-year warranty. Available in 3.73, 4.10, 4.56, 4.88 and 5.13 ratios..

Vehicle Application:

1972-1986 Jeep CJ 5/7/8

***This product is not discountable***

Visit Drive Train & Differential to see additional products in this category.

Jeep CJ 1 Piece AMC 20 Rear Axle Shaft, Right 1976-1981

Thu, 3 Mar 2011 15:41:00 GMT

Jeep CJ 1 Piece AMC 20 Rear Axle Shaft, Right 1976-1981
Buy Now: $239.39

Alloy USA - Axle Shaft Rear, AMC 20, 1 Piece Conversion RH, Narrow Trac

4140 Chromoly Performance Shafts;35 percent stronger than OE;10 year Limited warranty ;AMC 20;Right Hand,1 piece Conversion, Narrow Trac

Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA™ performance shaft.

Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 25-35% stronger.

We use the latest cold spline rolling technology to produce splines that are stronger than traditional cut splines. No cuts means no edges which create stress points and can lead to fracturing.

Axle shafts sold individually. Wheel bearings, seals and wheel studs available separately.

Each shaft is backed by our exclusive 10-year Limited warranty.

Vehicle Application:

1976-1983 Jeep CJ5

1976-1981 Jeep CJ7 & CJ8

***This product is not discountable***

Visit Drive Train & Differential to see additional products in this category.

Jeep CJ Rear Axle Shaft, Left 1976-1979

Thu, 3 Mar 2011 15:41:00 GMT

Jeep CJ Rear Axle Shaft, Left 1976-1979
Buy Now: $239.39

Alloy USA - Axle Shaft Rear, AMC 20, 1-Piece OE Style LH, Quadratrac

4140 Chromoly Performance Shafts;35 percent stronger than OE;10 year Limited warranty ;AMC 20;Left Hand, 1 piece Conversion, Quadratrac

Don’t just replace your axle shafts, upgrade them. For less than the cost or an original replacement axle shaft you can upgrade to an Alloy USA™ performance shaft.

Our axles are made from 1541H or 4140 steel depending on the application. Each axle is heat-treated and induction hardened to have twice the tensile strength than stock and is up to 25-35% stronger.

We use the latest cold spline rolling technology to produce splines that are stronger than traditional cut splines. No cuts means no edges which create stress points and can lead to fracturing.

Axle shafts sold individually. Wheel bearings, seals and wheel studs available separately.

Each shaft is backed by our exclusive 10-year Limited warranty.

Vehicle Application:

1976-1979 Jeep CJ7

***This product is not discountable***

Visit Drive Train & Differential to see additional products in this category.

Driveshaft Front T150 26.5"

Wed, 23 Feb 2011 15:04:00 GMT

Driveshaft Front T150 26.5"
Buy Now: $795.49

Front Driveshaft T150 Collapsed Length 26.5" Vehicle Application: 1976-1979 Jeep CJ7 6 & 8 Cylinder, 1976-1979 Jeep CJ5 6 & 8 Cylinder

***This product is not discountable***

Visit Drive Train & Differential to see additional products in this category.

Driveshaft Front T18 Automatic Transmission

Wed, 23 Feb 2011 15:04:00 GMT

Driveshaft Front T18 Automatic Transmission
Buy Now: $782.92

Driveshaft Front T18 Automatic Transmission Collapsed Length 30.25" Vehicle Application: 1976-1979 Jeep CJ7 6 & 8 Cylinder, 1976-1979 Jeep CJ5 6 & 8 Cylinder, 1981 Jeep CJ7 Cylinder Auto, 1981 Jeep CJ8 4 Cylinder Auto

***This product is not discountable***

Visit Drive Train & Differential to see additional products in this category.

Jeep Differential Skid Plate, Jeep Logo, Dana 30, Mopar Licensed

Wed, 23 Feb 2011 14:54:00 GMT

Jeep Differential Skid Plate, Jeep Logo, Dana 30, Mopar Licensed
Buy Now: $239.99

Jeep Differential Skid Plate, Jeep Logo, Dana 30, Mopar Licensed

Protect your factory differential cover with these heavy-duty skid plates. Designed to fit the contours of your stock differential cover with the distinctive Jeep® logo etched into the steel, these heavy duty skids look great while providing extra protection. Constructed of durable 3/16” black powder coated steel, these skid plates will help you slide over obstacles and not get hung up. Includes replacement mounting hardware and instructions. Official MOPAR Licensed product.

Vehicle Application:
1984-2001 Jeep Cherokee
1987-2006 Jeep Wrangler
2004-2013 Jeep Wrangler Unlimited
1993-2010 Jeep Grand Cherokee
1967-1973 Jeep Commando
1972-1973 Jeep Wagoneer
1972-1975 Jeep CJ6
1972-1983 Jeep CJ5
1976-1986 Jeep CJ7
1981-1986 Jeep Scrambler
1986 -1992 Jeep Comanche
2002-2007 Jeep Liberty

***This product is not discountable***

Installation Instructions - PDF Download

Visit Drive Train & Differential to see additional products in this category.

Differential Skid Plate, Jeep Logo, Dana 44, Mopar Licensed

Wed, 23 Feb 2011 14:54:00 GMT

Differential Skid Plate, Jeep Logo, Dana 44, Mopar Licensed
Buy Now: $239.99

Differential Skid Plate, Jeep Logo, Dana 44, Mopar Licensed

This Mopar licensed heavy duty differential skid plate fits a Dana 44 axle and has a Jeep logo stamped on it. Will not fit Aluminum Housing D44A.

Protect your factory differential cover with these heavy-duty skid plates. Designed to fit the contours of your stock differential cover with the distinctive Jeep® logo etched into the steel, these heavy duty skids look great while providing extra protection. Constructed of durable 3/16” black powder coated steel, these skid plates will help you slide over obstacles and not get hung up. Includes replacement mounting hardware and instructions. Official MOPAR Licensed product.

***This product is not discountable***

Installation Instructions - PDF Download

Visit Drive Train & Differential to see additional products in this category.