Fat Bob's Garage - 2016 / Ford / F350 Super Duty / All Products

Ford F250/F350 Super Duty 2" Cree LED Fog Light Kit Black Series 2011-2016

Wed, 20 Feb 2019 14:35:00 GMT

Ford F250/F350 Super Duty 2" Cree LED Fog Light Kit Black Series 2011-2016
Buy Now: $109.95

Ford F250/F350 Super Duty 2" Cree LED Fog Light Kit Black Series 2011-2016

Bring the state-of-the-art power and efficiency of LED lighting to your Ford Super Duty's factory fog lights with Rough Country's new Black-Series 2-inch Fog Light LED Kit. This clever LED & mount combo allows you to swap out the factory fog lights with Rough Country's 2-inch LED Cubes, offering increased illumination and killer, good looks that blend right in with the 2011-2016 design.The black panel design offers jaw-dropping good looks that blend perfectly with any vehicle using black accents like grilles, wheels, bull bars or steps! The easy-to-install mounts feature a 100% bolt-on install process and can be performed with common tools in no time flat.

Light up the road with 36 watts and 2880 Lumens of output power. Each kit includes a set of wiring adapters that quickly connect to your existing fog light wiring harness for instant installation, and also includes an optional, premium flat-wound wiring harness with in-line fuse and on/off switch. For peace of mind, each LED also includes Rough Country's 3-year Warranty.

Features:

Installs in factory fog light location
1440 lumens each
18 watts each
30 degree spot beam
Each light contains (6) 3 watt high intensity Cree LEDs
IP67 waterproof rating
Durable die cast aluminum housing
Includes wiring harness
3 year warranty

Notes:
Mounts to standard factory bumper ONLY

For off road use ONLY

Kit includes:

(2) 2" LED square lights, (2) fog light mounting brackets and hardware

Vehicle Application:
2011-2016 Ford F250 Super Duty 2WD/4WD
2011-2016 Ford F350 Super Duty 2WD/4WD

***This product is not discountable***

Installation Instructions - PDF Download

Visit F350 Super Duty to see additional products in this category.

Ford F250/F350 8" Coilover 4-Link Suspension Lift Kit 4WD 2011-2016

Tue, 27 Feb 2018 12:44:00 GMT

Ford F250/F350 8" Coilover 4-Link Suspension Lift Kit 4WD 2011-2016
Buy Now: $6,464.56

Ford F250/F350 8" Coilover 4-Link Suspension Lift Kit 4WD 2011-2016

Designed to allow the installation of Fox 2.5 factory series remote reservoir coilovers, this new system far surpasses the performance and capability of your Super Duty's stock suspension with more stability, improved handling, and better dampening in any terrain. Michigan built and Moab tested, these new coilover conversion 4-link systems are built to perform.

The system utilizes a pair of Fox 2.5 factory series remote coilovers tuned specifically to optimize suspension performance on the diesel equipped Ford Super Duty. The 8" travel coilovers feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs, black anodized machined 6061-T6 billet aluminum mounts, and FOX's DSC (dual speed compression) adjustment technology on DSC equipped coil-overs. DSC is the next big thing in suspension performance allowing for easy adjustment of the your truck's suspension compression dampening so you can dial in the ideal ride performance to soak up the bumps, both large and small. The DSC has 12 adjustment points for the high speed compression as well as 10 adjustment points for the low speed compression allowing you to make large or small changes to further improve your performance. Adjustments can be made by simply twisting the "blue" high speed and "gold" low speed compression knobs located on the end of the remote reservoir of the FOX 2.5 coilovers. No tools or shop adjustments needed, allowing you to tune the suspension out on the trail.

The key to mounting these new DSC coilovers are the new brackets supplied by BDS. In place of the factory stamped steel coil buckets BDS includes a pair of the massive 1/4" thick steel, gusseted construction coilover mounting brackets designed to bolt in place using the factory frame holes. This provides a stout mounting point for the new Fox 2.5 coilovers with provisions for the remote reservoirs as well as an auxiliary shock. The auxiliary shock mount will accept anything from the supplied Fox 2.0 Performance series shocks up to the massive 3.0 Fox Factory series cylinders. At the axle, new double-shear C/O mounting brackets bolt in for a direct replacement to the factory coil seats. All brackets are finished in a durable textured black powder coat finish with integrated mounting tabs to retain the factory brake and ABS lines.

To complement the increased performance of the new coilovers, BDS designed the kit around the popular BDS 4-link conversion to upgrade the stock stamped steel factory radius arms. The BDS Super Duty 4-Link conversion has long been a popular solution for 2005-2016 Super Duty owners looking to improve their trucks drivability and performance. The full replacement 4-link frame brackets bolt into factory holes and create a solid mounting location for the massive tubular 4-link arms. These arms allow the front suspension geometry to be optimized for control and handling through all types of terrain. The front portion of the lift system also includes a forged drop pitman arm and front track bar relocation bracket to correct steering and track bar angles as well as to center the axle under the vehicle. Front bump stop extensions, sway bar drops, and brake line relocation brackets round out the front of this system. In the rear, full replacement BDS Glideride leaf springs provide the lift needed to level and level the stance. The springs are a 5-leaf design with built in overload leaf to assist when carrying heavy loads. New black e-coated u-bolts, brake line brackets and Fox 2.0 performance gas shocks are supplied to round out the 8" coilover conversion 4-link system.

Notes:

Exhaust modification may be required to clear front driveshaft (gas only)
Front bumper spacer kit may be required to run 38"x15.50" tires
Although extremely rare, front driveline vibration may occur
If equipped with 2-piece rear driveshaft, driveshaft alignment kit (#123406) will be required
Front driveshaft u-joints may max out at full droop. If so, a new front shaft will be required.
If equipped with rear sway bar, #123009 is required.
U-bolts will not work on dually.
Front auxiliary shocks can be omitted from kit - system can be used with C/O installed alone
BDS leaf springs are not intended for use beyond the truck's maximum payload capacity. Trucks equipped with overload springs will only have the capacity of a non-overload equipped truck. If heavy payload use is desired, supplemental rear air bags are recommended.

Tire & Wheel Combinations:

38" x 15.50" w/17 x 9 and 4.5" back spacing
38" x 15.50" w/18 x 9 and 4.5" back spacing
38" x 15.50" w/20 x 9 / 20 x 10 and 4.5" back spacing

Estimated Install Time: 8-10 hours

Vehicle Applications:
2011-2016 Ford F250 Super Duty 4WD
2011-2016 Ford F350 Super Duty 4WD

Installation Instructions - PDF Download

Visit F350 Super Duty to see additional products in this category.

BDS Ford F250/F350 Recoil Traction Bars 99-16 4wd

Tue, 13 Sep 2016 14:59:00 GMT

BDS Ford F250/F350 Recoil Traction Bars 99-16 4wd
Buy Now: $1,129.99

BDS Ford F250/F350 Recoil Traction Bars 99-16 4wd

BDS Suspension introduces a revolutionary spring loaded traction bar system engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. These next generation RECOIL traction bars offer you the freedom to tune the spring tension for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.

The RECOIL traction bars mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install using a set of u-bolts. The traction bars and mounting brackets use a durable gloss black powdercoat finish.

These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go!

Vehicle Application:
1999 - 2016 Ford F250/F350 4wd

Notes:

Specific kits for long box and short box models
Fits 0-6" of rear lift
Fits single rear wheel models only
Will work with vehicles equipped with factory rear sway bar

Visit F350 Super Duty to see additional products in this category.

Ford F250/F350 6" Coil Over Lift Kit 2011-2016

Thu, 15 Oct 2015 06:47:00 GMT

Ford F250/F350 6" Coil Over Lift Kit 2011-2016
Buy Now: $5,466.37

Ford F250/F350 6" Coil Over Lift Kit 2011-2016

Convert the factory front coil spring suspension to a high performance Fox 2.5 Factory Reservoir Coil Over.

Coil over mounting brackets replace the front facotry coil buckets. The new brackets bolt on using factory frame holes. New double shear coil over mounting brackets replace the factory coil seats at the axle. These brackets have integrated mounting tabs to retain factory brake and ABS lines.

4 Link conversion suspension system replaces the factory radius arms. The 4 link frame brackets bolt into factory holes for mounting the 4 link arms. The front of the lift includes a drop pitman arm and a front track bar relocation bracket to center the axle under the vehicle and correct steering and track bar angles. Front bump stop extensions, sway bar drops and brake line relocation round out the front of the system. The rear includes replacement BDS leaf springs to lift and level the rear of the vehicle with the front.

Notes:
If equipped with 2 piece driveshaft part #123402 carrier bearing drop may be required.

Although extremely rare, front driveline vibration may occur.

If equipped with rear sway bar part #123009 extended sway bar links are required.

Front auxiliary shocks can be omitted from kit, system can be used with c/o installed alone.

This kit is FMVSS No.126 compliant.

Tire & Wheel Combinations: 37" x 12.50" w/ 17 x 9 and 4.5" back spacing
Estimated Install Time: 8-10 hours

Vehicle Application:
2011-2016 Ford F250 Super Duty
2011-2016 Ford F350 Super Duty

Installation Instructions - PDF Download 1 of 2

Installation Instructions - PDF Download 2 of 2

Visit F350 Super Duty to see additional products in this category.

Ford F250/F350 Rear Tan Floor Liner Set 1999-2016

Tue, 28 Jan 2014 10:42:00 GMT

Ford F250/F350 Rear Tan Floor Liner Set 1999-2016
Buy Now: $99.99

Ford F250/F350 Rear Tan Floor Liner Set 1999-2016

***This product is not discountable***

Visit F350 Super Duty to see additional products in this category.

Ford F250/F350 Rear Tan All Terrain Floor Liner 1999-2016

Thu, 23 Jan 2014 13:48:00 GMT

Ford F250/F350 Rear Tan All Terrain Floor Liner 1999-2016
Buy Now: $93.32

Ford F250/F350 Rear Tan All Terrain Floor Liner 1999-2016

Precision engineering ensures an exact fit to the contour of your vehicle’s floor. Deeply molded chevron-shape tread pattern channels dirt, mud and snow away from the driver to keep shoes and pant legs clean. The high perimeter wall offers interior protection and containment. Raised nibs on the bottom keep the liner in place. The self-sealing floor attachment prevents dirt and moisture from getting through. Easy to remove and clean. Simply hose them off and go!!! Patents D627,285 & 8,136,369.

Vehicle Application:
1999-2016 Ford F250
1999-2016 Ford F350

***This product is not discountable***

Visit F350 Super Duty to see additional products in this category.

Ford F250/F350 Super Duty Zone Offroad Dual Steering Stabilizer 2005-2016

Wed, 28 Aug 2013 10:04:00 GMT

Ford F250/F350 Super Duty Zone Offroad Dual Steering Stabilizer 2005-2016
Buy Now: $175.95

Zone Offroad Dual Steering Stabilizer

Expanded twin tube design provides increased fluid capacity for reduced internal temperatures. Zone steering stabilizers are custom valved to handle larger tires to improve handling both on and offroad. Available in black or white finish to match your Zone Offroad shock of choice.

Designed to replace the factory steering stabilizer and re-use the factory mounts. If you do not have and OE steering stabilizer, the tie rod mount will have to be purchased from a Ford dealer. These dual stabilizers are an end to end design that utilizes a laarge center bracket that mounts to the axle tube via u-bolts and is designed to work on vehicles with 2" of lift and up.

Features:

5/8" hardened and double chromed rod
1 3/8" diameter piston
Double welded eyelet
Urethane bushings

Vehicle Application:
2005-2016 Ford F250 Super Duty 4WD
2005-2016 Ford F350 Super Duty 4WD

Installation Instructions - PDF Download

Visit F350 Super Duty to see additional products in this category.

Ford F250/F350 Front Nitro Shock (Pair) 2005-2016

Mon, 26 Aug 2013 11:22:00 GMT

Ford F250/F350 Front Nitro Shock (Pair) 2005-2016
Buy Now: $79.90

Zone Offroad Front Nitro Shock

The New Zone Nitro Series shock absorber offers the ultimate in control and performance. The full displaced valving offers a better valving range on both the compression and extension travel. This vehicle specific valving is pressurized with nitrogen gas. This gas charge ensures split second response and reduced aeration. Combine these features with the special Fluon banded piston and this shock is built to perform!

Features:

Nitrogen charged
Twin tube design
10 stage velocity sensitive valving
Heavy chromed 5/8" rod
1 3/8" Fluon Banded Piston
Self Lubricating Seals
Full Displaced Valving
Dual Welded Ends

Vehicle Application:
2005-2016 Ford F250 Super Duty 4WD 1-2" Lift
2005-2016 Ford F350 Super Duty 4WD 1-2" Lift

Installation Instructions - PDF Download

Visit F350 Super Duty to see additional products in this category.

Ford F250/F350 Super Duty Dual Steering Stabilizer 4WD 2005-2018

Thu, 6 Jun 2013 12:00:00 GMT

Ford F250/F350 Super Duty Dual Steering Stabilizer 4WD 2005-2018
Buy Now: $144.95

Ford F250/F350 Super Duty Dual Steering Stabilizer 4WD 2005-2018

With the installation of all lift kits and larger tires it is important to check the condition of your steering stabilizer. If the stabilizer is worn or is leaking it should be replaced.

Steering stabilizers are designed to restrain "bump steering" and front end vibration, giving added life to tires, ball joints, and other steering components. A multiple stabilizer kit is recommended for vehicles equipped with a snow plow, winch, or 35" tires and above.