Fat Bob's Garage - 2019 / GMC / All Products

Chevy/GMC Silverado/Sierra 1500 Pickup 3.5" DSC Coilover Suspension Lift Kit 19-21

Wed, 21 Apr 2021 11:43:03 GMT

Chevy/GMC Silverado/Sierra 1500 Pickup 3.5" DSC Coilover Suspension Lift Kit 19-21
Buy Now: $3,775.00

Chevy/GMC Silverado/Sierra 1500 Pickup 3.5" DSC Coilover Suspension Lift Kit 19-21

These 3.5" DSC Coilovers Systems are designed to build on the stout factory front suspension designed to take performance to the next level. At the heart of these 3.5" systems are a pair of specially tuned FOX 2.5 factory race series DSC coilovers. These coilovers are backed by FOX's racing pedigree, preset for the correct lift height right out of the box to provide optimal performance and direct bolt-in replacement for the factory strut assemblies. They feature a smooth bore and honed seamless alloy body, 7/8" hardened steel carbon shaft, Eibach coil springs and black anodized machined 6061-T6 billet aluminum mounts along with remote reservoirs with mounting brackets. The DSC (dual speed compression) reservoir allows for easy tool-free adjustment of high-speed and low-speed compression adjustment settings to further dial in the damping to the terrain and ride preferences. Also supplied for the front end are a pair of performance upper control arms (UCAs) designed for improved strength and suspension travel. Built from thick wall 1.5" DOM tubing, these UCAs utilize an indexed ball joint cup to reposition the upper ball joints and allowing more droop travel. These arms come fully assembled right out of the box with high quality greaseable ball joints and rubber bushings for long life, quiet operation and superior corrosion resistance over uniballs and heims.

In the rear of these lift systems the factory leaf springs are retained and 2" lift comes from a replacement set of lift blocks. Also supplied for the rear of these 3.5" lift kits are your choice of FOX 2.0 performance series IFP shocks or upgraded FOX 2.5 factory series DSC adjustable shocks to match the front performance and adjustability. These kits come finished in a durable black powdercoat finish and sent with all hardware packs to complete the install along with step-by-step installation instructions.

Vehicle Application:
2019+ Chevy Silverado 1500 4wd
2019+ GMC Sierra 1500 4wd

Notes:

5.5" max wheel backspacing can be used
Will not fit Denali models with ARC
Will fit Trail Boss/AT4 models however will net 1.5" of lift over factory ride height

Tire & Wheel Combinations:

35x12.50 w/20x9 and 5.5 (Chevy) back spacing
33x12.50 w/20x9 and 5.5 (GMC) back spacing

*Trimming may be required*

Visit GMC to see additional products in this category.

Chevrolet/GMC 2500HD Upper Control Arms 2011-2019 4WD

Tue, 19 Nov 2019 09:09:47 GMT

Chevrolet/GMC 2500HD Upper Control Arms 2011-2019 4WD
Buy Now: $449.95

Chevrolet/GMC 2500HD Upper Control Arms 2011-2019 4WD

Kit Contents:
(2) Upper control arms

Benefits:

Control arms include POM ball joints for greater range of motion and easier installation.
Control arms include Clevite brand OEM style rubber bushings.
Estimated install time: 4-6 hours

Note:
ONLY fits models with 3.5" of suspension lift

Vehicle Application:
2011-2019 Chevrolet Silverado 2500 HD 4WD
2011-2019 GMC Sierra 2500 HD 4WD

Visit GMC to see additional products in this category.

GM Silverado/Sierra 1500 Pickup Forged Upper Control Arms 2019

Thu, 26 Sep 2019 15:50:52 GMT

GM Silverado/Sierra 1500 Pickup Forged Upper Control Arms 2019
Buy Now: $339.95

GM Silverado/Sierra 1500 Pickup Forged Upper Control Arms 2019

Features:

Made of forged aluminum for unsurpassed strength and durability.
No welding weak spots.
Corrected ball joint angle for lifted applications.
Includes POM ball joints for greater range of motion and easier installation
Ball joints are fully greaesable
Includes Clevite brand OEM style rubber bushings

Vehicle Application:
2019+ Chevy Silverado 1500 4wd*
2019+ GMC Sierra 1500 4wd*

*Notes:

ONLY fits models with 3 to 3.5 inches of suspension lift
Does NOT fit stock height models

Visit GMC to see additional products in this category.

Chevy/GMC Silverado/Sierra 1500 Pickup 6" Suspension System 19-20

Wed, 11 Sep 2019 15:04:41 GMT

Chevy/GMC Silverado/Sierra 1500 Pickup 6" Suspension System 19-20
Buy Now: $1,395.95

Chevy/GMC Silverado/Sierra 1500 Pickup 6" Suspension System 19-20

Heavy duty crossmembers with differential skid plate
Specially designed steering knuckles maintain ESC compatibility
Maintains ride quality and handling characteristics
Factory Protection Plus included
Allows clearance for 35-37" tires

Vehicle Application:
2019+ Chevy Silverado 1500 4wd
2019+ GMC Sierra 1500 4wd

Notes:

Requires frame bracket modification
Will NOT fit MagneRide / Adaptive Ride equipped models
Stock 17" and 18" wheels cannot be reinstalled due to tie rod end interference, stock 20" wheels can be reinstalled.
17" Wheels with 4.5" backspacing should be test fit prior to mounting the tire to ensure proper clearance to the steering knuckle / tie rod.
All aftermarket wheels should be test fit prior to mounting the tire to ensure proper clearance to the brake caliper. Some wheel profiles will not clear the brake caliper. These can be test fitted before the vehicle is lifted in a stock condition.
Will NOT work with TrailBoss or AT4 models.

Visit GMC to see additional products in this category.

Chevy Silverado Trail Boss & GMC Sierra AT4 1.75" Leveling Kit 19-20

Wed, 11 Sep 2019 14:45:51 GMT

Chevy Silverado Trail Boss & GMC Sierra AT4 1.75" Leveling Kit 19-20
Buy Now: $129.95

Chevy Silverado Trail Boss & GMC Sierra AT4 1.75" Leveling Kit 19-20

3-piece design with top mount spacer and 2 preload spacers to raise ride height without over-extending suspension during droop travel
Maintains ride quality and handling characteristics
Allows clearance for 33-34" tires
Includes Factory Protection Plus

Vehicle Application:
2019+ Chevy Silverado 1500 Trail Boss
2019+ GMC Sierra 1500 AT4

Notes:

Strut compressor required for installation.
Will not fit Adaptive Ride Control (ARC) equipped models.
Tires wider than 295/ cannot be installed on factory wheels due to clearance issues to the steering knuckles.
Welding required to install optional LCA steering stops.
Complete 1.75" leveling recommended for AT4, Trail Boss suspension not as raked for the factory so installing without thin preload spacer will net 1-3/8" lift for a level stance.

Visit GMC to see additional products in this category.

Chevrolet/GMC Silverado/Sierra 2500HD/3500HD 5" Suspension Lift Kit 2011-2019

Wed, 15 Apr 2015 09:17:00 GMT

Chevrolet/GMC Silverado/Sierra 2500HD/3500HD 5" Suspension Lift Kit 2011-2019
Buy Now: $1,699.95

Chevrolet/GMC Silverado/Sierra 2500HD/3500HD 5" Suspension Lift Kit 2011-2019

Features:

Maintains factory ride quality.

Maintains the stock track width.

Torsion bars stay in the factory location.

Unmatched ground clearance.

Axles maintain factory position and angle.

No drilling or modifying of the differential.

No drivetrain or exhaust modifications required.

Includes application valved N3 series shocks.

Notes:

Requires minor cutting and drilling.

Does NOT fit dually models.

Does NOT fit models with Magnetic Ride Control.

Gas models may require modification to the exhaust for driveshaft clearance.

Factory rear overload springs will NEED to be removed on equipped models.

Does NOT work with factory wheels.

If installing aftermarket wheels: Models equipped with factory 17" wheels must use 17" aftermarket wheels or larger due to larger calipers/rotor.

Kit Includes:

Front: Lifted knuckles, front crossmember, rear crossmember, differential drop brackets, differential skid plate, Non-torsion bar drop brackets, sway bar link extensions, sway bar brackets, upper shock brackets, extended brake lines and hardware.

Rear: Lifted blocks, u-bolts, bump stop brackets, brake line brackets, e-brake line bracket and hardware.

Shocks: 4 Premium N3 series

Max Tire Size: 295/60R20

Estimated Install Time: 8-10 hours

Vehicle Application:

2011-2019 Chevrolet Silverado 2500 HD 4WD

2011-2019 Chevrolet Silverado 3500 HD 4WD

2011-2019 GMC Sierra 2500 HD 4WD

2011-2019 GMC Sierra 3500 HD 4WD

Installation Instructions - PDF Download

***This product is not discountable***

Visit GMC to see additional products in this category.

Chevrolet/GMC 2500 HD/3500 HD 1.5-2" Leveling Kit 4WD 2011-2019

Wed, 15 May 2013 11:15:00 GMT

Chevrolet/GMC 2500 HD/3500 HD 1.5-2" Leveling Kit 4WD 2011-2019
Buy Now: $119.95

Chevrolet/GMC 2500 HD/3500 HD 1.5-2" Leveling Kit 4WD 2011-2019

Kit Contents:
Front: Leveling torsion bar keys and shock extension sleeves.

Benefits:

100% Bolt on installation.
Increased ground clearance.

Estimated Install Time: 2-3 hours
Wheel Backspacing: Factory
Recommended Tire Size: 285/75

Vehicle Application:
2011-2019 Chevrolet 2500 HD 4WD
2011-2019 Chevrolet 3500 HD 4WD
2011-2019 GMC 2500 HD 4WD
2011-2019 GMC 3500 HD 4WD

Installation Instructions - PDF Download

***This product is not discountable***

Visit GMC to see additional products in this category.

Chevrolet/GMC 1/2 Ton Avalanche/Pickup/Tahoe/Yukon/Suburban 2" Leveling Kit 4WD 2007-2019

Mon, 13 May 2013 12:30:00 GMT

Chevrolet/GMC 1/2 Ton Avalanche/Pickup/Tahoe/Yukon/Suburban 2" Leveling Kit 4WD 2007-2019
Buy Now: $49.95

Chevrolet/GMC 1/2 Ton Avalanche/Pickup/Tahoe/Yukon/Suburban 2" Leveling Kit 4WD 2007-2019

Kit Contains:
Front: Lower strut mount extensions and hardware.

Note:

Does NOT fit Chevy TrailBoss Models
Does NOT fit GMC AT4 Models
Does NOT fit 2014-2018 GMC "Denali" models. Use RC1311 instead.
Does NOT fit "MagneRide" models.
Does NOT fit 2007 "Classic" models.

Benefits:

Maintains factory ride quality.
Increased ground clearance.
Levels the front with the rear of the vehicle.
No need to disassemble your struts to install.
100% simple bolt on installation.

Estimated Install Time: 2-3 hours
Recommended Tire Size: 285/70
Wheel Backspacing: Factory

Vehicle Application:
2007-2019 Chevrolet 1500 Pickup
2007-2019 GMC 1500 Pickup
2007-2018 Chevrolet Tahoe
2007-2018 GMC Yukon
2007-2018 Chevrolet Suburban
2007-2018 GMC Yukon XL
2007-2013 Chevrolet Avalanche

Installation Instructions - PDF Download

***This product is not discountable***

Visit GMC to see additional products in this category.

Chevrolet/GMC 2500HD/3500 HD Pickup 5" IFS System 2011-2019

Thu, 24 Mar 2011 14:00:00 GMT

Chevrolet/GMC 2500HD/3500 HD Pickup 5" IFS System 2011-2019
Buy Now: $1,439.94

Chevrolet/GMC 2500HD/3500 HD Pickup 5" IFS System 2011-2019

The Zone 2500/3500 HD system is built to withstand the trail as well as make a great daily driver. The one piece main crossmembers in combination with the CNC machined steering knuckles create OE style geometry for the ride you demand. The differential skid plate/belly pan offers off-road protection for the serious trails. Combine this with vehicle specific valved Zone shocks and you have a winning combination all made in the USA!

Features:
One piece 1/4" steel crossmembers
CNC machined ductile iron steering knuckles
Differential skid plate for offroad protection
3" Rear block kit for easy installation
No Differential Trimming Required

Notes:
Torsion bar unloading/loading tool required
Frame bracket modifications required for installation
With a 20" Wheel a 5"-6" backspacing is recommended
Rear kit designed for single rear wheel axles.
Stock 17" or 18" Wheels cannot be re-installed

Estimated Install Time: 6-8 hours
Max Tire Size: 35 x 12.50
Wheel Backspacing: 4.5-4.625 for 17/18, 5-6" for 20

Vehicle Application:
2011-2019 Chevrolet 2500 HD Silverado 4WD
2011-2019 Chevrolet 3500 HD Silverado 4WD
2011-2019 GMC 2500 HD Sierra 4WD
2011-2019 GMC 3500 HD Sierra 4WD

Option:
Add a matching steering stabilizer for $56.95

Installation Instructions - PDF Download

Visit GMC to see additional products in this category.