Fat Bob's Garage - 2013 / Dodge / Ram 2500 / All Products

Dodge Ram 2500 3" Suspension Lift Kit 4WD 2003-2013

Mon, 1 Oct 2018 13:36:00 GMT

Dodge Ram 2500 3" Suspension Lift Kit 4WD 2003-2013
Buy Now: $469.95

Dodge Ram 2500 3" Suspension Lift Kit 4WD 2003-2013

Kit Contains:
Front: Lifted coil springs
Rear: 1" fabricated lift blocks, u-bolts and hardware
Shocks: (4) Premium N3 series shocks.

Notes:
Does NOT fit gas engine models.
Does not fit dually models.
Does not fit Power Wagon models.

Benefits:

Easy bolt-on installation.
Increased ground clearance.
Features application valved N3 series shock absorbers which offer the best in balanced performance for on and off-road use.
Fabricated blocks are stronger and offer a longer lifespan than cast blocks.

Estimated Install Time 3-5 hours
Max Tire Size: 35 x 12.50

Vehicle Application:
2003-2013 Dodge Ram 2500 Diesel 4wd

Visit Ram 2500 to see additional products in this category.

Dodge Ram 2500/3500 Steering Brace 2009-2016

Wed, 11 Jan 2017 12:27:00 GMT

Dodge Ram 2500/3500 Steering Brace 2009-2016
Buy Now: $169.95

Dodge Ram 2500/3500 Steering Brace 2009-2016

Extra strength where your truck needs it most. This durable brace adds rigid support for the sector shaft, eliminating side to side play. This steering brace also ties the frame horns together, helping eliminate frame flex and offering a tighter steering feel and longer lifespan for your steering box.

Features:

Creates a tighter steering feel, eliminating any side-to-side play or "wander."
Helps eliminate frame flex by tying the bottom pivot point of the steering box to both frame rails.
Longer lifespan for your steering box
Easy bolt-on installation
Powder coated black for corrosion resistance

Kit Includes:

Steering brace, pitman arm nut, bearing block and hardware.

Vehicle Application:
2009-2016 Dodge Ram 2500 4WD
2009-2016 Dodge Ram 3500 4WD

***This product is not discountable***

Installation Instructions - PDF Download

Visit Ram 2500 to see additional products in this category.

Dodge Ram 2500/3500 FOX 2.0 Performance Series 8" Front Shocks (Pair) 2013+

Mon, 3 Oct 2016 14:32:00 GMT

Dodge Ram 2500/3500 FOX 2.0 Performance Series 8" Front Shocks (Pair) 2013+
Buy Now: $417.90

Dodge Ram 2500/3500 FOX 2.0 Performance Series 8" Front Shocks (Pair) 2013+

Features:

Cold-forged, metal-impacted 6061 T6 aluminum shock body dissipates heat three times faster than a conventional steel body shock. The 2.0 Performance Series shock runs as cool as a 2.5 diameter shock on the same application.
FOX Racing Shox formulated race shock oil developed for ultimate performance at variable temperatures.
CNC machined aluminum components are Type II hard anodized to a scratch- and fade-free finish.
Heavy-duty 5/8" chrome shafts are induction case hardened to over 55 Rockwell C, virtually eliminating scratches caused by rust and debris.
These shocks are designed to be used with BDS Suspension lifts but may also work with other brand lifts. Please see specs for details or contact us.

Vehicle Application:

2013+ Dodge Ram 2500 4WD 8" Lift
2013-2015 Dodge Ram 3500 4WD 8" Lift

Specs:

Extended length: 29.85"
Collapsed length: 18.25"
Top mount: S50
Bottom mount: EB1

Installation Instructions - PDF Download

***This product is not discountable***

Visit Ram 2500 to see additional products in this category.

BDS Dodge Ram 2500/3500 Recoil Traction Bars 03-16

Tue, 13 Sep 2016 14:52:00 GMT

BDS Dodge Ram 2500/3500 Recoil Traction Bars 03-16
Buy Now: $1,111.99

BDS Dodge Ram 2500/3500 Recoil Traction Bars 03-16

BDS Suspension introduces a revolutionary spring loaded traction bar system engineered to improve traction and limit axle wrap without negatively affecting suspension travel or ride quality. These next generation RECOIL traction bars offer you the freedom to tune the spring tension for optimal performance on-road, off-road, towing, or competition pulling. These traction bars can be used on stock height or lifted trucks and work with both lift blocks and replacement leaf spring kits. They use a full floating design that won't bind up allowing the full range of wheel travel without limiting articulation.

The RECOIL traction bars mount to the vehicle using fabricated 1/4" steel brackets. Bracket kits are vehicle specific. The frame brackets install by drilling mounting holes for the brackets while the axle brackets install using a set of u-bolts. The traction bars and mounting brackets use a durable gloss black powdercoat finish.

These new RECOIL traction bars are built to the highest standards featuring quick and easy adjustment while installed on the vehicle. To adjust spring tension, use the supplied spanner wrenches at the axle to loosen the jam nut. From there the main bar can be rotated to load or unload the springs at the frame side of the bar. Using the concave end of the wrench handle against the frame end check the location of the end of the main bar in relation to the notches on the wrench to verify the load on the springs, the shorter the distance the more loaded the springs are. Repeat this process on the other traction bar and use the wrenches to tighten down the jam nuts and you are ready to go!

Vehicle Application:
2003 - 2013 Ram 2500 4wd
2003 - 2016 Ram 3500 4wd

Notes:

ONLY fits models with 4" rear axle
Fits 0-6" of rear lift
Fits single rear wheel models only

Visit Ram 2500 to see additional products in this category.

Dodge Permanent Diff. Lock Kit 1994-2002

Wed, 28 Oct 2015 10:25:00 GMT

Dodge Permanent Diff. Lock Kit 1994-2002
Buy Now: $99.95

Dodge Permanent Diff. Lock Kit

The Alloy USA® Differential Perma-Lock Kit Is A Permanent Replacement For The Failure Prone OE Vacuum Disconnect System. The Kit Permanently Engages The Central Axle Disconnect (Cad) And Couples Both Front Axles. Once Installed The Axles Will Automatically Engage As Soon As The Transfer Case Is Placed Into Four Wheel Drive

Vehicle Application:
1994-2002 Dodge Ram 1500
1994-2002 Dodge Ram 2500
1994-2002 Dodge Ram 3500

***This product is not discountable***

Installation Instructions - PDF Download

Visit Ram 2500 to see additional products in this category.

Dodge Ram 2500/3500 BDS Fox 2.0 Dual Steering Stabilizer Kit 2008-2013 4WD

Mon, 5 Oct 2015 13:24:00 GMT

Dodge Ram 2500/3500 BDS Fox 2.0 Dual Steering Stabilizer Kit 2008-2013 4WD
Buy Now: $568.55

Dodge Ram 2500/3500 BDS FOX 2.0 Dual Steering Stabilizer Kit2008-2013 4WD

Benefits:

Includes Fox 2.0 Performance stabilizercylinders.
Improves drivability by reducing front end shimmy caused byoversized tires.
Center bracket built from ultra strong 3/8" steel.
Outer stabilizer mounts built from 1/4" steel and finished in same durable powder coat.
Finished in a durable textured black powder coat with a rivetedstainless steel BDS badging.
Fox 2.0 cylinders are cold forged 6061 T6 aluminum to resistcorrosion.
This high performance setup gives a great finished look to yourlifted Ram truck.

Brand: BDS Suspension / FOX

Vehicle Application:

2008 - 2013 Dodge Ram 2500 4wd*

2008 - 2012 Dodge Ram 35004wd*

*MUST have inverted "T" style steering

Kit Contents:

(2) Fox 2.0 Series stabilizer cylinders, brackets &hardware.

Notes:

ONLY fits models with at least 2" of suspension liftinstalled.
Designed for Ram 2500's/3500's with factory 4-link suspension and the inverted "T" style steering.
For trucks using the inverted "Y" style steering, the steering assembly must first be converted over before installing the kit.

Visit Ram 2500 to see additional products in this category.

Dodge Ram 2500/3500 Carrier Bearing Shims 2011-2014

Mon, 24 Aug 2015 12:11:00 GMT

Dodge Ram 2500/3500 Carrier Bearing Shims 2011-2014
Buy Now: $44.95

Dodge Ram 2500/3500 Carrier Bearing Shims 2011-2016

There is potential for take off vibrateion on vehicles equipped with a tow piece drive shaft and carrier bearing. This can be corrected with shimming down the carrier bearing with these shims.

Estimated Install Time: 2-3 hours

Kit Includes: 3 carrier bearing shims and hardware.

Vehicle Application:
2003-2016 Dodge Ram 2500 4WD
2003-2016 Dodge Ram 3500 4WD

***This product is not discountable***

Visit Ram 2500 to see additional products in this category.

Dodge Ram 1500/2500 Pitman Arm 2009-Present

Mon, 27 Oct 2014 13:31:00 GMT

Dodge Ram 1500/2500 Pitman Arm 2009-Present
Buy Now: $95.00

Dodge Ram 1500/2500 Pitman Arm

Vehicle Application:
2009-Present Dodge Ram 1500
2009-Present Dodge Ram 2500

Visit Ram 2500 to see additional products in this category.

Dodge Ram 2500 3” Lift Kit w/Bilstein 5160 Reservoir Shock Absorbers 4WD 2003-2013

Mon, 27 Oct 2014 13:31:00 GMT

Dodge Ram 2500 3” Lift Kit w/Bilstein 5160 Reservoir Shock Absorbers 4WD 2003-2013
Buy Now: $1,660.00

Dodge Ram 2500 3” Suspension Lift Kit

Includes Bilstein 5160 Reservoir Shock Absorbers

Vehicle Application:
2003-2013 Dodge Ram 2500 4WD

Visit Ram 2500 to see additional products in this category.

Dodge Ram 2500/3500 4”-5” Lift Kit w/Bilstein 5100 Shock Absorbers 8-lug 4WD 2003-2013

Mon, 27 Oct 2014 13:31:00 GMT

Dodge Ram 2500/3500 4”-5” Lift Kit w/Bilstein 5100 Shock Absorbers 8-lug 4WD 2003-2013
Buy Now: $1,550.00

Dodge Ram 2500/3500 4”-5” Suspension Lift Kit

Dodge has come a long way over the years, continuing to improve both its quality and strength. The late model 8 lug platform has become a mainstay with truck consumers, especially with the Cummins Diesel crowd. The ever popular solid axle front end continues to perform well and lend itself to be modified with a plethora of aftermarket products. RCD Suspension has utilized its high quality design and manufacturing capability to produce a system that both rides and performs whether on the street or in the dirt. 94-02 1500 & 2500 4wd solid axle vehicles get a “long arm” style system, while the 03-08 2500 4wd utilizes a similar system in a short arm kit.

Kit Includes:
(2) progressive rate coil sprins
Replacement upper & lower links with polyurethane encased flex joints
Front track bar and upper link relocation brackets
Replacement forged pitman arm
Sway bar drop down brackets
Rear lift blocks
Bilstein 5100 shock absorbers

Notes:
Will NOT work with Air Ride or Electronic Suspension Systems.
Recalibration of the speedometer, ABS and stability control systems will be required.
Actual lift height will vary based on engine and chassis combinations. Some instances may require additional rear lift and/or Ubolts.
Single Rear Wheel only/non-dually.
Must select appropriate pitman arm to complete the kit installation.

Max Tire Size:
35" with minor bumper and fender trimming
Backspacing:
17" & larger x 9" - 4.5" backspacing

Vehicle Application:
2003-2013 Dodge Ram 2500 8Lug 4WD
2003-2013 Dodge Ram 3500 8Lug 4WD

Visit Ram 2500 to see additional products in this category.