Fat Bob's Garage - 2011 / Jeep / Wrangler / Suspension & Steering / All Products

Jeep Wrangler JK Rear Track Bar Bracket for 2.5"-6" Lift 2007-2018

Mon, 14 Oct 2019 14:09:58 GMT

Jeep Wrangler JK Rear Track Bar Bracket for 2.5"-6" Lift 2007-2018
Buy Now: $44.95

Jeep Wrangler JK Rear Track Bar Bracket for 2.5"-6" Lift 2007-2018

Optional rear track bar bracket that moves the rear axle approximately 1/4 inch to recenter.

Vehicle Application:
2007-2018 Jeep JK Wrangler 4WD
2007-2018 Jeep JK Wrangler Unlimited 4WD

Visit Suspension & Steering to see additional products in this category.

Jeep Wrangler JK 2"-7" Lift Adjustable Track Bar 2007-2017

Wed, 21 Nov 2018 22:46:00 GMT

Jeep Wrangler JK 2"-7" Lift Adjustable Track Bar 2007-2017
Buy Now: $189.95

Jeep Wrangler JK 2"-7" Lift Adjustable Track Bar 2007-2017

Benefits:
Forged adjustable track bar can easily be adjusted while on the Jeep.

Can be used on models with 2" up to 7" of suspension lift.

Vehicle Application:
2007 - 2017 Jeep Wrangler JK/JKU

Visit Suspension & Steering to see additional products in this category.

Jeep Wrangler Rear Sway Bar End Links 2WD/4WD 2007-2014

Fri, 12 Jun 2015 08:30:00 GMT

Jeep Wrangler Rear Sway Bar End Links 2WD/4WD 2007-2014
Buy Now: $57.37

Jeep Wrangler Rear Sway Bar End Links 2WD/4WD 2007-2014

Extended sway bar link spans the increased distance from sway bar to axle at full droop. Made of solid steel tube with polyurethane ends. Includes installation hardware.

Notes: Required on 07-12 Jeep Rubicon models with electronic sway bar disconnect.

Features:

Polyurethane bushings.
Powder coated.
Hardware included.

Vehicle Application:

2007-2014 Jeep Wrangler 2WD/4WD

Installation Instructions - PDF Download

Visit Suspension & Steering to see additional products in this category.

Jeep Cherokee/Grand Cherokee/Wrangler Lower Control Arm Bushing Kit 1984-2016

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Cherokee/Grand Cherokee/Wrangler Lower Control Arm Bushing Kit 1984-2016
Buy Now: $47.25

Jeep Cherokee/Grand Cherokee/Wrangler Lower Control Arm Bushing Kit 1984-2016

Designed and produced by BDS as a part of an engineered suspension system. Internally and externally fluted bushings for improved lubrication flow. Designed to handle some serious abuse.

Notes:

1st generation arms use 1 1/2" OD bushings, 2nd generation arms use 1 7/8" OD bushings.

Vehicle Application:

1984-2001 Jeep Cherokee

1993-1998 Jeep Grand Cherokee

2007-2016 Jeep Wrangler

1997-2006 Jeep Wrangler

Visit Suspension & Steering to see additional products in this category.

Jeep Cherokee/Grand Cherokee/Wrangler Lower Control Arm Replacement Bushing 1984-2016

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Cherokee/Grand Cherokee/Wrangler Lower Control Arm Replacement Bushing 1984-2016
Buy Now: $15.35

Jeep Cherokee/Grand Cherokee/Wrangler Lower Control Arm Replacement Bushing 1984-2016

Designed and produced by BDS as a part of an engineered suspension system. Internally and externally fluted bushings for improved lubrication flow. Designed to handle some serious abuse.

Notes:

1st generation arms use 1 1/2" OD bushings, 2nd generation arms use 1 7/8" OD bushings.

Will work as factory control arm replacement bushings also.

ZJ applications may require front frame mount spacer washer kit #124081 if not already equipped.

Vehicle Application:

1984-2001 Jeep Cherokee

1993-1998 Jeep Grand Cherokee

2007-2016 Jeep Wrangler

1997-2006 Jeep Wrangler

Visit Suspension & Steering to see additional products in this category.

Jeep Cherokee/Grand Cherokee/Wrangler Upper Control Arm Replacement Rubber Bushing 1984-2016

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Cherokee/Grand Cherokee/Wrangler Upper Control Arm Replacement Rubber Bushing 1984-2016
Buy Now: $15.35

Jeep Cherokee/Grand Cherokee/Wrangler Upper Control Arm Replacement Rubber Bushing 1984-2016

Designed and produced by BDS as a part of an engineered suspension system. Internally and externally fluted bushings for improved lubrication flow. Designed to handle some serious abuse.

Notes:

1st generation amrs use 1 1/2" OD bushings, 2nd generation arms use 1 7/8" OD bushings.

Will work as factory control arm replacement bushing also.

Vehicle Application:

1984-2001 Jeep Cherokee

1993-1998 Jeep Grand Cherokee

2007-2016 Jeep Wrangler

1997-2006 Jeep Wrangler

Visit Suspension & Steering to see additional products in this category.

Jeep Wrangler Generation II Adjustable Front Lower Control Arms 2007-2015

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Wrangler Generation II Adjustable Front Lower Control Arms 2007-2015
Buy Now: $376.15

Jeep Wrangler Generation II Adjustable Front Lower Control Arms 2007-2015

1 3/4" diameter .250 wall formed control arms. Control arms come fully assembled and are sold in pairs. Control arms come with installed new rubber bushings.

Features:

Forged flex end that features 4" long by 1-1/4" male threads for maximum adjustability and strength without sacrifcing thread engagement.
15 degree of twist allowed to increase droop and compression without transferring torational load to your control arm mounts.
Center steel ball is controlled by tough urethane races to absorb shock and vibration while increasing offroad performance.
For maximum shock and vibration reduction, the other end of the arm uses OE Jeep rubber bushings.
Massive Forged Flex End featuring 1-1/4" threads and 15 degrees of misalignment.
Full adjustment from stock to 6-1/2" of lift.
Greasable flex eye with tough urethane bushings.
Easily rebuildable.
Rubber bushing end to maximize driver comfort.

Vehicle Application:

2007-2015 Jeep Wrangler Front Lower

Installation Instructions - PDF Download

Visit Suspension & Steering to see additional products in this category.

Jeep Wrangler Generation II Adjustable Rear Upper Control Arms 2007-2015

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Wrangler Generation II Adjustable Rear Upper Control Arms 2007-2015
Buy Now: $338.75

Jeep Wrangler Generation II Adjustable Rear Upper Control Arms 2007-2015

1 3/4" diameter .250 wall formed control arms. Control arms come fully assembled and are sold in pairs. Control arms come with installed new rubber bushings.

Features:

Forged flex end that features 3 1/4" long by 1" male threads for maximum adjustability and strength without sacrifcing thread engagement.
15 degree of twist allowed to increase droop and compression without transferring torational load to your control arm mounts.
Center steel ball is controlled by tough urethane races to absorb shock and vibration while increasing offroad performance.

Vehicle Application:

2007-2015 Jeep Wrangler Rear Upper

Installation Instructions - PDF Download

Visit Suspension & Steering to see additional products in this category.

Jeep Wrangler Generation II Fixed Front Lower Control Arms 2007-2015

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Wrangler Generation II Fixed Front Lower Control Arms 2007-2015
Buy Now: $230.95

Jeep Wrangler Generation II Fixed Front Lower Control Arms 2007-2015

1 3/4" diameter .250 wall formed control arms. Control arms come fully assembled and are sold in pairs. Control arms come with installed new rubber bushings. Bushings are durometer specific, OEM quality vulcanized Cleavite rubber bushings for improved longevity and reduced noise. Optional urethane bushings are available separately.

Features:

Heavy Duty construction.
Increased length to correct caster with a suspension lift.
Lifetime warranty - if it bends/breaks BDS will replace it.
Formed arms to increase droop travel.
Rubber bushings on both ends to maximize vibration absorption and allow for some twist within the bushing.
Increased length for 2-4" of lift.

Vehicle Application:

2007-2015 Jeep Wrangler Front Lower

Installation Instructions - PDF Download

Visit Suspension & Steering to see additional products in this category.

Jeep Wrangler Generation II Rear Lower Control Arms 2007-2015

Tue, 28 Apr 2015 08:13:00 GMT

Jeep Wrangler Generation II Rear Lower Control Arms 2007-2015
Buy Now: $230.95

Jeep Wrangler Generation II Rear Lower Control Arms 2007-2015

Control arms come fully assembled and are sold in pairs. Control arms come with installed new rubber bushings.

Features:

Heavy duty construction.
Increased length to correct caster with a suspension lift.
Lifetime warranty - if it bends/breaks BDS will replace it.
Formed arms to increase droop travel.
Rubber bushings on both ends to maximize vibration absorption and allow for some twist within the bushing.
Increased length for 2-4" of lift.

Vehicle Application:

2007-2015 Jeep Wrangler Rear Lower

Installation Instructions - PDF Download

Visit Suspension & Steering to see additional products in this category.