Fat Bob's Garage - 2017 / Toyota / Tacoma / All Products

Toyota Tacoma 2" Front Spacer Lift Level Kit 2WD/4WD 6Lug 2005-2023

Thu, 17 Feb 2022 09:49:09 GMT

Toyota Tacoma 2" Front Spacer Lift Level Kit 2WD/4WD 6Lug 2005-2023
Buy Now: $89.95

Toyota Tacoma 4x4 Front Aluminum Spacer Lift Kit 2005-2023 (6-lug)

Kit requires disassembly of the front struts. Spacers measure 1" tall and provide 2" of lift when installed.

Vehicle Application:
2005+ Toyota Tacoma 4x4 & Pre-Runner 2WD/4WD (6-lug ONLY)

*For 5 Lug 2WD Tacoma's see part number 42275L

White 2006 Toyota Tacoma picture courtesy of D. Jones Tehachapi, California

Installation Instructions - PDF Download

Visit Tacoma to see additional products in this category.

Toyota Tacoma Vated 6" Adjustable Coilovers 2005-2023

Wed, 17 Feb 2021 15:00:45 GMT

Toyota Tacoma Vated 6" Adjustable Coilovers 2005-2023
Buy Now: $879.95

Toyota Tacoma Vated 6" Adjustable Coilovers 2005-2023

Adjustable coilovers to fine tune ride height.
Come pre-assembled for easy install.
Includes Bilstein 5100 struts and available with optional 5100 rear shocks.
Spring rate is 600 for a good ride quality.
Also fits XREAS suspension models (requires replacement of rear shocks to non-XREAS shocks)
Sold in pairs
Spanner wrenches sold separately
Coils may come in silver or black finish, depending on availability.
*Can ONLY be used in conjunction with an existing 6" suspension lift. Replaces spacer kits using stock struts.

Vehicle Application:
2005+ Toyota Tacoma 4WD/2WD (6-lug models ONLY)

Installation Instructions - PDF Download Coilovers
Installation Instructions - PDF Download Differential Drop

Visit Tacoma to see additional products in this category.

Toyota Tacoma 4" Suspension Lift Kit 4WD 2017-2019

Wed, 15 Aug 2018 12:11:00 GMT

Toyota Tacoma 4" Suspension Lift Kit 4WD 2017-2019
Buy Now: $2,171.45

Toyota Tacoma 4" Suspension Lift Kit 4WD 2017-2019

This new Tacoma IFS suspension lift incorperates all of the same features from our popular 05-15 Tacoma systems while addressing OE design changes on 2017 models. Following BDS proven design standards, the 2017 system utilizes full 1 piece front & rear crossmembers coupled with precision machined ductile cast iron steering knuckles. The steering knuckles are designed to work within the factory traction control constraints and provide stock-like handling characteristics. The knuckles are also considerably more robust in both the mass and strength categories over the rather light-duty stock components.

The crossmembers are built from ¼" steel plate and have integrated differential mounts that work with the new provided differential mounts to properly drop and reposition the front differential for optimal CV and front driveshaft angles.

The whole package is protected by a new belly pan skid plate that runs from the front to rear crossmember and integrates cleanly with the factory from skid/splash guard.

The factory front struts are retained with the kit utilizing a top strut spacer to gain the proper lift height.

The rear of the kit comes with 3" blocks and u-bolts to level the truck and all of the necessary brake line relocation brackets needed.

This system will also fit 2wd PreRunner models, but will not work on the standard 2wd model.

Tire & Wheel Combinations
33 x 12.50 w/18 x 9 and 4.5" Max. back spacing
w/20 x 9 and 4.5" Max. back spacing
*Trimming may be required*

Est. Installation: 6-8 hours
Difficulty Level (easy 1 - 5 complicated): 3

Vehicle Application:
2017 - 2019 Toyota Tacoma 4WD/2WD PreRunner

Notes:

Will NOT work on TRD Pro Models
Minor welding required
Requires frame bracket modification
Stock wheels cannot be reinstalled
System will work on 2wd PreRunner models
Cannot use 17" wheels

Visit Tacoma to see additional products in this category.

Toyota Tacoma 6" Suspension Lift Kit 4WD 2016-2019

Tue, 13 Sep 2016 09:57:00 GMT

Toyota Tacoma 6" Suspension Lift Kit 4WD 2016-2019
Buy Now: $1,249.95

ToyotaTacoma 6" Suspension Lift Kit 2016-2019 4WD

Benefits:

Increased ground clearance.
No strut disassembly or strut compressorrequired for installation.
Features application valved N2.0 seriesshock absorbers which offer the best in balanced performance for on andoff-road use.
Fabricated blocks are stronger and offera longer lifespan than cast blocks.

VehicleApplication:

2016-2019 Toyota Tacoma 4WD

Recommended Tire Size:

33x12.50 R17 with 4 1/2 - 5" backspacing

KitContents:

Front: Lifted knuckles, strut spacers, frontcrossmember, rear crossmember, front skid plate, lower skid plate, differentialdrop brackets, steering stop, bumpstops, bumpstop extensions, sway-barrelocation brackets, brake line brackets, hardware
Rear: 4.5" Fabricated lift blocks, u-bolts, carrierbearing shims, brake line brackets, hardware
Shocks: (2) Rear Premium N2.0 series

Notes:

Requires minor cutting and drilling.
Does NOT fit XSP-X models.
Does NOT fit XSP-X models.
Requires aftermarket wheels - Does NOT work with factory wheels.

Installation Instructions - PDF Download

Visit Tacoma to see additional products in this category.

Toyota Tacoma 4" Suspension Lift Kit 4WD 2016-2019

Tue, 13 Sep 2016 09:44:00 GMT

Toyota Tacoma 4" Suspension Lift Kit 4WD 2016-2019
Buy Now: $999.95

ToyotaTacoma 4" Suspension Lift Kit 2016-2019 4WD

Benefits:

Easy bolt-on installation.
Increased ground clearance.
No strut disassembly or strut compressorrequired for installation.
Features application valved N2.0 seriesshock absorbers which offer the best in balanced performance for on andoff-road use.
Fabricated blocks are stronger and offera longer lifespan than cast blocks.

VehicleApplication:

2016-2019 Toyota Tacoma 4WD

Recommended Tire Size:

32x10.50 R17 with 4 1/2 - 5" backspacing

KitContents:

Front: Lifted knuckles, strut spacers, frontcrossmember, rear crossmember, front skid plate, lower skid plate, differentialdrop brackets, steering stop, bumpstops, bumpstop extensions, sway-barrelocation brackets, brake line brackets, hardware
Rear: 2.5" Fabricated lift blocks, u-bolts, carrierbearing shims, brake line brackets, hardware
Shocks: (2) Rear Premium N2.0 series

Notes:

Requires minor cutting and drilling.
Does NOT fit XSP-X models.
Does NOT fit XSP-X models.
Requires aftermarket wheels - Does NOT work with factory wheels.

Installation Instructions - PDF Download

Visit Tacoma to see additional products in this category.

Toyota Tacoma 3" Leveling Kit 4WD/2WD* 6Lug 2005-2023 (XREAS MODELS)

Thu, 26 May 2016 12:52:00 GMT

Toyota Tacoma 3" Leveling Kit 4WD/2WD* 6Lug 2005-2023 (XREAS MODELS)
Buy Now: $119.95

Toyota Tacoma 3" Leveling Kit 4WD/2WD (6-Lug) 2005-2023 w/ XREAS Suspension

1/4" HOT P.O. STEEL PLATE is precision CNC cut.
HEAVY WALL D.O.M. PIPE for a superior load bearing member to ensure maximum stability.
GRADE 8 BOLTS, where others use only grade 5.
ROBOTIC PULSED WELDING produces an aerospace grade weld that is of a much higher quality than the short arc weld found on similar products.
POWDER COATING that has been specially formulated for this product application. Paint just won't cut it!
OEM FLAGE LOCK NUTS are included with every kit to ensure a proper torque spec. can be met on install.
ILLUSTRATED INSTRUCTIONS are included with every kit to help with a quick and easy install.
This kit will retain factory ride quality. Stock shocks can be used. No additional modification to the truck is necessary.
LIFETIME WARRANTY
Allows 33 Inch Tires!
NO Spring Compressor Required.
Easily bolts onto stock strut mounts.
A floor jack, two jack stands, and normal shop tools are all you need for installation.
Installs in 30-90 minutes!

When choosing a lift kit for YOUR TOYOTA TRUCK accept nothing less than the highest quality. As always, every item is 100% guaranteed for quality and value! Customer satisfaction is our #1 goal! These are the high-quality spacers you've been looking for. You'll be glad that you chose the very best product and service available!

Vehicle Application:
2005+ Toyota Tacoma 4WD/2WD (6-lug) w/ XREAS suspension

Installation Instructions - PDF Download

*For 5 Lug 2WD Tacoma's see part number 422755L-AAL

***Xreas stands for Relative Absorber System. The x refers to the systems cross linking of the shock absorbers.

To identify if you have Xreas Suspension: There is a black hydraulic hose going to the top of each shock, this hose runs along the outside of the main frame connecting each shock to a central control module.***

Visit Tacoma to see additional products in this category.